Young Hardening Concrete
콘크리트 대량 타설은 서비스 수명 이전에 슬롯사이트 업 조기 균열을 초래할 수 있습니다. 이는 댐과 같은 수력 슬롯사이트 업 경우에 위험할 수 있습니다. 배합의 선택, 시간과 연속적인 타설은 콘크리트의 균열을 줄이거나 방지할 수 있습니다. 경우에 따라 냉각 시스템을 사용할 수도 있습니다. 초기 재령 콘크리트의 거동은 슬롯사이트 업 확장이나 보수 등의 목적으로 기존 구조물에 타설하는 경우에도 해당됩니다. DIANA는 다양한 범위의 초기 재령 콘크리트 모델을 제공하며, 선형 또는 보다 상세한 비선형 분석으로 균열을 예측할 수 있습니다.
구조물을 초기 재령에 대해서 해석하는 것은 크리프와 건조수축과 같이 슬롯사이트 업 수명 기간에 다른 문제를 시뮬레이션하는 일련의 분석이 뒤 따릅니다. 이를 통해 슬롯사이트 업 수명 기간 중 언제든지 스트레스 상태를 보다 현실적으로 모델링하고 슬롯사이트 업 손상을 유발하거나 구조 성능을 저하시킬 수 있는 결함의 발생을 예측할 수 있습니다.
초기 재령 콘크리트의 전용기능 (Dedicated Features for Analysis of Young Hardening Concrete)
해석 기능 (Analysis Features)
- Coupled thermo-stress with automatic conversion of temperature field to mechanical loading
- Possibility to add/remove elements or change boundary conditions during the analysis
- Calculation of the heat of hydration from:
- - Direct input of the heat production as function of the degree of reaction
- - Preprocessing from the adiabatic curve
- - User Supplied Subroutine
- Heat transfer by conduction, convection and radiation
- Dependence of thermal material properties on temperature, time and degree of reaction
- Time dependence of the convective heat coefficient, to simulate presence or removal of scaffolding, and presence of wind
- Cooling pipe elements

재료 모델 (Material Models)
- Evolution of Young’s modulus according to:
- - Reinhardt model
- - Model codes (CEB-FIP Model Code 1990 & 2010, Eurocode, ACI 209, AASHTO, NEN 6720/A4,
JSCE, JCI, KCI)
- - Laboratory curves
- - User Supplied Subroutine
- Visco-elasticity: Double Power Law, Kelvin and Maxwell chains
- Crack prediction with the tensile strength utilization index and degree of reaction dependent
tensile strength (linear analysis)
- Crack prediction with non-linear analysis:
- - Smeared crack models with:
- - Degree of reaction dependence of the tension cut-off and tension softening
- - Degree of reaction dependence of shear behavior
- - Degree of reaction dependence of compression functions
- - Discrete crack model with degree of reaction dependence of the tension cut-off and tension softening
- Visco-elasticity with temperature dependent Young's modulus: Power law, Kelvin and Maxwell
chains
- Transient creep
- User-supplied subroutines